Aggiusta la tua roba Comunità Store

Olympus Stylus Tough-6000 On/Off Button Replacement

Introduzione

This guide will show clear and easy steps on how to replace the On/Off button.

Cosa ti serve

  1. Olympus Stylus Tough-6000 On/Off Button Replacement, Locate On/Off Button.: passo 1, immagine 1 di 1

    • First sit the camera on its bottom. You will be working on the on/off button.

    Modifica

  2. Olympus Stylus Tough-6000 On/Off Button Replacement: passo 2, immagine 1 di 1

    • Place camera upward.

    • You will notice two screws near the on/off button.

    • Use your Phillips #00 screwdriver to unscrew the two screws.

    Modifica

  4. Olympus Stylus Tough-6000 On/Off Button Replacement: passo 3, immagine 1 di 1

    • After unscrewing the two screws near the on/off button you will notice a single screw to your right.

    • Unscrew the single screw with your Phillips #00 screwdriver.

    • This will allow you to pry the panel off.

    Modifica

  5. Olympus Stylus Tough-6000 On/Off Button Replacement: passo 4, immagine 1 di 1

    • Grab your plastic opening tool and start prying off the panel.

    Modifica

  6. Olympus Stylus Tough-6000 On/Off Button Replacement: passo 5, immagine 1 di 1

    • Once the panel is lifted you will want to lift up the cover for the on/off button.

    • The actual on/off button is very small and loose so make sure to be careful with it!

    Modifica

  7. Olympus Stylus Tough-6000 On/Off Button Replacement: passo 6, immagine 1 di 1

    • You have reached the on/off button.

    • You can now replace it!

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 1

Tutti i Tempi: 567