Salta al contenuto principale

Introduzione

I will be providing clear and easy steps on how to replace your Lens Cover on your Olympus Stylus Tough-6000 Digital Camera.

Ricambi

Nessuna parte specificata.

  1. Olympus Stylus Tough-6000 Lens Cover Replacement, Disassemble Camera.: passo 1, immagine 1 di 1
    • You will want to disassemble the camera to get to the Lens Cover.

  2. Olympus Stylus Tough-6000 Lens Cover Replacement: passo 2, immagine 1 di 1
    • There are two screws on the right side of the camera.

    • Use your Phillips #00 screwdriver and unscrew both screws.

  3. Olympus Stylus Tough-6000 Lens Cover Replacement: passo 3, immagine 1 di 1
    • On the left side of the camera there will be another set of screws.

    • Unscrew both screws with the same Phillips #00 screwdriver.

  4. Olympus Stylus Tough-6000 Lens Cover Replacement: passo 4, immagine 1 di 1
    • After unscrewing the screws on the left side of the camera you will notice a speaker hat.

    • You will be able to pull the speaker hat off.

    • You must pull the speaker hat off to be able to pry the front shell of the camera apart.

  5. Olympus Stylus Tough-6000 Lens Cover Replacement: passo 5, immagine 1 di 1
    • Grab your plastic opening tool and begin to pry off the front shell of the camera.

    • The front shell will easily come off after a couple of prys.

  6. Olympus Stylus Tough-6000 Lens Cover Replacement: passo 6, immagine 1 di 1
    • Once you have the camera shell cover off you can see the lens cover.

    • Unscrew the lens cover with your Phillips #00 screwdriver to replace it with a new lens cover.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 7

Tutti i Tempi: 940