Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the 2 screws from the bottom of the camera
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the screw from the right side of the camera.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two screws from the left side of the camera
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Separate the front casing from the back using a plastic opening tool, gently.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pull the silver bracket and buttons off of the camera
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the 2 screws on the right side of the camera.
-
Remove the 2 screws on the left side of the camera.
-
Pull the camera apart into 2 separate pieces.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Flip up clip on circuit ribbon, carefully
-
Detach the ribbon from the rear to the front and pull it out, gently.
-