Parti

Nessuna parte richiesta.

  1. Remove the 2 screws from the bottom of the camera
    • Remove the 2 screws from the bottom of the camera

    Aggiungi Commento

  2. Remove the screw from the right side of the camera.
    • Remove the screw from the right side of the camera.

    Aggiungi Commento

    • Remove the two screws from the left side of the camera

    Aggiungi Commento

    • Separate the front casing from the back using a plastic opening tool, gently.

    • Silver band and buttons will become loose when you remove the two pieces.

    Aggiungi Commento

    • Pull the silver bracket and buttons off of the camera

    Aggiungi Commento

    • Remove the 2 screws on the right side of the camera.

    • Remove the 2 screws on the left side of the camera.

    • Circuit ribbon is attached at the top-left of the camera. Be careful when separating the front and back of the camera.

    • Pull the camera apart into 2 separate pieces.

    Aggiungi Commento

    • Flip up clip on circuit ribbon, carefully

    • Detach the ribbon from the rear to the front and pull it out, gently.

    Aggiungi Commento

    • You will be left with four major pieces

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Tracy Donovan

Membro da: 10/02/2012

13 Reputazione

1 Guida realizzata

Team

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 1

Tutti i Tempi: 379