Aggiusta la tua roba Comunità Store

Olympus SZ-12 Back Case Replacement

Introduzione

You will need a clean, well-lit area, an iFixit repair kit including the specialized screw driver, along with the Phillips #000 bit. We also recommend you have an organization tray in order to keep track of all the screws you will be taking out.

Cosa ti serve

  1. Olympus SZ-12 Back Case Replacement, Back Case: passo 1, immagine 1 di 2 Olympus SZ-12 Back Case Replacement, Back Case: passo 1, immagine 2 di 2

    • Remove nine 4.45mm Phillips #000 screws from the outside of the case.

    Modifica

  2. Olympus SZ-12 Back Case Replacement: passo 2, immagine 1 di 1

    • There are four screws to take out on the bottom of the camera.

    Modifica

  4. Olympus SZ-12 Back Case Replacement: passo 3, immagine 1 di 1

    • There are three screws to take out on this side.

    Modifica

  5. Olympus SZ-12 Back Case Replacement: passo 4, immagine 1 di 1

    • There is one screw to take out on this side.

    Modifica

  6. Olympus SZ-12 Back Case Replacement: passo 5, immagine 1 di 1

    • There is one hidden screw inside the HDMI port.

    Modifica

  7. Olympus SZ-12 Back Case Replacement: passo 6, immagine 1 di 1

    • Using the blue plastic opening tool, wedge open and remove the case.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 4

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 10

Tutti i Tempi: 480