Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Olympus OM-D E-M10 Mark II Lens Replacement

  1. Olympus OM-D E-M10 Mark II Lens Replacement, Lens: passo 1, immagine 1 di 1
    • Press the black button located to the right of the camera lens when facing the front of the camera.

  2. Olympus OM-D E-M10 Mark II Lens Replacement: passo 2, immagine 1 di 1
    • Grasp the innermost ring on the lens, closest to the camera body, which can be located by the small red dot. This is the only ring that should not turn, unless the button specified in the previous step is held down.

  3. Olympus OM-D E-M10 Mark II Lens Replacement: passo 3, immagine 1 di 1
    • While holding down the button specified in step 1, begin turning the inner most ring, specified in step 2, counterclockwise until the camera lens becomes free from the camera body.

  4. Olympus OM-D E-M10 Mark II Lens Replacement: passo 4, immagine 1 di 1
    • Once the lens is free from the camera body, pull the lens completely away from the body to make sure the lens is truly free.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

USF Tampa, Team S5-G6, Eyestone Spring 2018 Membro di USF Tampa, Team S5-G6, Eyestone Spring 2018

USFT-EYESTONE-S18S5G6

4 Membri

10 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 15

Ultimi 30 Giorni: 51

Tutti i Tempi: 3,820