Introduzione

Step by step instructions to clean or replace the control buttons on the camera.

Parti

Nessuna parte richiesta.

Before disassembling your camera, be sure it is powered off.
  • Before disassembling your camera, be sure it is powered off.

  • Remove two screws from the video port located at the side panel of the camera.

  • Remove three screws from the bottom panel of the camera.

Aggiungi Commento

Open the USB port cover, and remove three screws from inside.
  • Open the USB port cover, and remove three screws from inside.

  • Next, open the memory slot cover and remove the screw.

Aggiungi Commento

  • Use the blue opening tool to loosen and separate the back cover from the camera.

Aggiungi Commento

  • Locate and unscrew the three screws inside the back cover body (picture 3) .

  • Remove button pad assembly from the back cover.

Aggiungi Commento

  • The button assembly is now separate from the back cover.

  • Inspect for broken areas. Replace or clean the button parts.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 716