Introduzione

We will show how to tear down to and remove the LCD screen.

Unscrew all immediately visible screws on the body of the camera.
  • Unscrew all immediately visible screws on the body of the camera.

  • Locations (# of screws): Bottom of camera (3), left side near video port (2), under cover of USB slot (3), memory card slot (1).

Aggiungi Commento

Use the plastic opening tool to separate the back cover from the camera.
  • Use the plastic opening tool to separate the back cover from the camera.

Aggiungi Commento

  • With the back plate off, locate two screws: one diagonal from the top left of the LCD screen and one diagonal from the top right of the LCD screen.

  • Unscrew both of these screws.

Aggiungi Commento

  • Flip the LCD screen over.

Aggiungi Commento

  • Undo the clip holding the ribbon cable that attaches the LCD screen to the motherboard.

Aggiungi Commento

  • Unclip the plug attached to the red and white wires that connects the LCD screen to the motherboard.

Aggiungi Commento

  • The LCD screen housing should now be free of the camera.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 5

Tutti i Tempi: 951