Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Unscrew the screws from the base of the blender (These should be 5 gauge phillips head screws).
-
2 of the screws will be star shaped rather than phillips head.
-
Remove the base plate.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Identify the red and black wires topped with white-clear caps.
-
Use pliers to squeeze the flattened part of both caps.
-
The black and red wires attached to the power cord should be loose and ready to pull out.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Replace the cord by slipping the new cord's black and red wires into the caps.
-
Pinch the middle of the cap back to the flattened position using the pliers.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.
2 Commenti
Como puedo extraer la parte donde sienta el vaso de mi licuadora ninja ct641
Como puedo extraer la base donde asienta el vaso de licuadora ninja ct641