Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Numark N4 Disassembly

Solo Prerequisita
Questa guida è destinata a essere usata solo come prerequisito per altre guide. Da sola è incompleta.

Cosa ti serve

  1. Numark N4 Disassembly, Numark N4 Disassembly: passo 1, immagine 1 di 1
    • Turn the Numark N4 over so that the bottom panel is facing upwards.

    • Loosen and remove the 17 12mm screws from the bottom panel using a Phillips #2 screwdriver.

  2. Numark N4 Disassembly: passo 2, immagine 1 di 1
    • Using your fingers, gently pull apart the two panels of the device until you feel resistance from the cables.

  3. Numark N4 Disassembly: passo 3, immagine 1 di 1
    • Using your fingers, gently unplug the larger ribbon cable as pictured.

  4. Numark N4 Disassembly: passo 4, immagine 1 di 1
    • Using your fingers, gently unplug the smaller ribbon cable as pictured.

  5. Numark N4 Disassembly: passo 5, immagine 1 di 1
    • Using your fingers, gently unplug the yellow and red cable as pictured.

  6. Numark N4 Disassembly: passo 6, immagine 1 di 1
    • Open the two panels completely, gently placing each side on your working area to avoid damage to the buttons on the outside face.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Team

USF Tampa, Team S13-G11, Cagle Fall 2017 Membro di USF Tampa, Team S13-G11, Cagle Fall 2017

USFT-CAGLE-F17S13G11

4 Membri

12 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 41