Parti

Nessuna parte richiesta.

Orient the phone as shown.
  • Orient the phone as shown.

  • Press the button with the plastic opening tool and slide the back case downward relative to the phone.

Aggiungi Commento

Remove the battery cover by lifting it away from the phone.
  • Remove the battery cover by lifting it away from the phone.

Aggiungi Commento

  • Insert the plastic opening tool into the marked space.

  • Lift up the side of the battery closest to the bottom edge of the phone using the plastic opening tool.

Aggiungi Commento

  • Remove the battery from the phone.

Aggiungi Commento

  • Insert the plastic opening tool in the marked areas in between the front and back covers.

  • Pry each corner with the plastic opening tool until the front case completely detaches.

Aggiungi Commento

  • Orient the phone so that the keypad is facing you.

  • Remove the keypad by lifting it away from the phone.

Aggiungi Commento

  • Use the T6 Torx screwdriver to remove the six 15 mm Torx screws.

Aggiungi Commento

  • Lift the bottom edge of the front panel at a 45 degree angle.

  • Remove front panel by slowly pulling it away from the phone at a 45 degree angle.

Aggiungi Commento

  • Locate the speaker location located on the back panel of the phone.

  • Using the tweezers place one side of tweezers in the rectangular slot where the speaker is located

  • Slowly lift speaker away from the back panel.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Justin

Membro da: 12/10/2011

924 Reputazione

10 Guide realizzate

Team

Cal Poly, Team 6-2, Regan Fall 2011 Membro di Cal Poly, Team 6-2, Regan Fall 2011

CPSU-REGAN-F11S6G2

4 Membri

10 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 6

Tutti i Tempi: 3,738