Salta al contenuto principale

Nokia Lumia 930 Vibration Module Replacement

Cosa ti serve

  1. Nokia Lumia 930 Vibration Module Replacement, Battery: passo 1, immagine 1 di 1
    • Pull the SIM card holder out of the top of the phone using your fingernail.

  2. Nokia Lumia 930 Vibration Module Replacement: passo 2, immagine 1 di 2 Nokia Lumia 930 Vibration Module Replacement: passo 2, immagine 2 di 2
    • Place tweezers or an opening tool in the SIM card slot and push upwards until the back panel pops out.

  3. Nokia Lumia 930 Vibration Module Replacement: passo 3, immagine 1 di 2 Nokia Lumia 930 Vibration Module Replacement: passo 3, immagine 2 di 2
    • Wedge a plastic opening tool between the two panels. Slide it along each side of the phone to completely remove the back panel.

  4. Nokia Lumia 930 Vibration Module Replacement: passo 4, immagine 1 di 1
    • Remove the 4mm Torx #4 screw that's securing the battery connector.

  5. Nokia Lumia 930 Vibration Module Replacement: passo 5, immagine 1 di 1
    • Use tweezers to remove the battery connector strap.

  6. Nokia Lumia 930 Vibration Module Replacement: passo 6, immagine 1 di 2 Nokia Lumia 930 Vibration Module Replacement: passo 6, immagine 2 di 2
    • Remove all ten 4mm Torx #4 screws that secure the battery cover to the frame of the phone.

  7. Nokia Lumia 930 Vibration Module Replacement: passo 7, immagine 1 di 3 Nokia Lumia 930 Vibration Module Replacement: passo 7, immagine 2 di 3 Nokia Lumia 930 Vibration Module Replacement: passo 7, immagine 3 di 3
    • Use the flat end of a spudger to pry the battery cover from the phone's frame.

  8. Nokia Lumia 930 Vibration Module Replacement: passo 8, immagine 1 di 1
    • Pull up on the heat spreader.

    • Be careful not to tear it!

  9. Nokia Lumia 930 Vibration Module Replacement: passo 9, immagine 1 di 1
    • Use the flat end of the spudger to lift up the battery.

    • The battery is glued in place. Pry up carefully, not to damage it.

    • Two flex cables are directly underneath the battery.

  10. Nokia Lumia 930 Vibration Module Replacement: passo 10, immagine 1 di 1
    • Remove the battery from the phone.

  11. Nokia Lumia 930 Vibration Module Replacement, Motherboard: passo 11, immagine 1 di 2 Nokia Lumia 930 Vibration Module Replacement, Motherboard: passo 11, immagine 2 di 2
    • Use the flat end of a spudger to disconnect the camera connectors.

    • Pull the camera up and out to remove it from the phone.

  12. Nokia Lumia 930 Vibration Module Replacement: passo 12, immagine 1 di 1
    • Use the flat end of a spudger to disconnect the six ribbon cables from the motherboard.

  13. Nokia Lumia 930 Vibration Module Replacement: passo 13, immagine 1 di 3 Nokia Lumia 930 Vibration Module Replacement: passo 13, immagine 2 di 3 Nokia Lumia 930 Vibration Module Replacement: passo 13, immagine 3 di 3
    • Use the flat end of a spudger to pry up the orange flex cable underneath the battery.

    • Remove the orange flex cable from the phone.

  14. Nokia Lumia 930 Vibration Module Replacement: passo 14, immagine 1 di 1
    • Repeat the previous step for the black jumper flex cable under the battery.

  15. Nokia Lumia 930 Vibration Module Replacement: passo 15, immagine 1 di 2 Nokia Lumia 930 Vibration Module Replacement: passo 15, immagine 2 di 2
    • Use the flat end of a spudger to disconnect both ends of the antenna cable from the motherboard.

    • Remove the antenna.

  16. Nokia Lumia 930 Vibration Module Replacement: passo 16, immagine 1 di 1
    • Use tweezers to grab the adhesive that is under the LTE flex cable and pull it outwards and towards the bottom end of the phone.

    • Apply new adhesive when reassembling the phone.

  17. Nokia Lumia 930 Vibration Module Replacement: passo 17, immagine 1 di 3 Nokia Lumia 930 Vibration Module Replacement: passo 17, immagine 2 di 3 Nokia Lumia 930 Vibration Module Replacement: passo 17, immagine 3 di 3
    • Use a spudger to pry up the bottom end of the motherboard, then pull it out.

  18. Nokia Lumia 930 Vibration Module Replacement, Daughterboard: passo 18, immagine 1 di 2 Nokia Lumia 930 Vibration Module Replacement, Daughterboard: passo 18, immagine 2 di 2
    • Use the pointed end of the spudger to pry up the daughterboard.

    • Use tweezers to lift the daughterboard out of the phone.

  19. Nokia Lumia 930 Vibration Module Replacement, Vibration Module: passo 19, immagine 1 di 2 Nokia Lumia 930 Vibration Module Replacement, Vibration Module: passo 19, immagine 2 di 2
    • Use a pair of tweezers to remove the vibration boot that covers the module.

  20. Nokia Lumia 930 Vibration Module Replacement: passo 20, immagine 1 di 1
    • Use the flat end of the spudger to lift the module off of the adhesive.

    • Be delicate so that you don't break off the rotating piece of the module.

  21. Nokia Lumia 930 Vibration Module Replacement: passo 21, immagine 1 di 2 Nokia Lumia 930 Vibration Module Replacement: passo 21, immagine 2 di 2
    • Use tweezers to continually lift the module and flex up off of the adhesive.

    • Pull up until the vibration module is completely removed.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 4

Tutti i Tempi: 289