Aggiusta la tua roba Comunità Store

Nokia Lumia 610 Touchscreen Glass / Digitizer Assembly Replacement

Introduzione

This repair is very easy; all you need is a T5 Torx Screwdriver, and a new Digitizer Glass & Frame Assebly - it's better to order it with the Front Frame as well, as it makes repairing a lot simpler, and will give your phone a new look and feel.

Cosa ti serve

  1. Nokia Lumia 610 Touchscreen Glass / Digitizer Assembly Replacement, Touchscreen Glass / Digitizer Assembly: passo 1, immagine 1 di 1

    • The first thing you'll need is a Nokia Lumia 610 with a broken front glass

    Traduci

  2. Nokia Lumia 610 Touchscreen Glass / Digitizer Assembly Replacement: passo 2, immagine 1 di 2 Nokia Lumia 610 Touchscreen Glass / Digitizer Assembly Replacement: passo 2, immagine 2 di 2

    • Slide the back cover off, and remove the battery

    Traduci

  3. Nokia Lumia 610 Touchscreen Glass / Digitizer Assembly Replacement: passo 3, immagine 1 di 2 Nokia Lumia 610 Touchscreen Glass / Digitizer Assembly Replacement: passo 3, immagine 2 di 2

    • There are 8 Torx 5 screws you have to remove, 4 on each side

    Traduci

  4. Nokia Lumia 610 Touchscreen Glass / Digitizer Assembly Replacement: passo 4, immagine 1 di 3 Nokia Lumia 610 Touchscreen Glass / Digitizer Assembly Replacement: passo 4, immagine 2 di 3 Nokia Lumia 610 Touchscreen Glass / Digitizer Assembly Replacement: passo 4, immagine 3 di 3

    • After removing all 8 screws, proceed to prying off the back cover

    • This is done very easily, by prying it from the 3 grooves depicted

    • This step might also be done using your nails, as the clips are not strong at all

    Traduci

  5. Nokia Lumia 610 Touchscreen Glass / Digitizer Assembly Replacement: passo 5, immagine 1 di 1

    • Watch out - the buttons easily fall out; just make sure you don't loose any, a'aight ?!

    Traduci

  7. Nokia Lumia 610 Touchscreen Glass / Digitizer Assembly Replacement: passo 6, immagine 1 di 2 Nokia Lumia 610 Touchscreen Glass / Digitizer Assembly Replacement: passo 6, immagine 2 di 2

    • Lift the back cover up, and pull it back - most likely, the 2 sided tape sealing the camera module will be the last thing to break loose

    • Make sure you stick it back to the rear case assembly after this step

    Traduci

  8. Nokia Lumia 610 Touchscreen Glass / Digitizer Assembly Replacement: passo 7, immagine 1 di 3 Nokia Lumia 610 Touchscreen Glass / Digitizer Assembly Replacement: passo 7, immagine 2 di 3 Nokia Lumia 610 Touchscreen Glass / Digitizer Assembly Replacement: passo 7, immagine 3 di 3

    • Disconnect the 2 ribbon cables connecting the LCD & Digitizer to the motherboard

    Traduci

  9. Nokia Lumia 610 Touchscreen Glass / Digitizer Assembly Replacement: passo 8, immagine 1 di 1

    • Now to separate the Motherboard from the front assembly !

    • Gently pry on the 2 hooks depicted in the picture to release the motherboard

    • Again - using your nails should be just fine !

    Traduci

  10. Nokia Lumia 610 Touchscreen Glass / Digitizer Assembly Replacement: passo 9, immagine 1 di 2 Nokia Lumia 610 Touchscreen Glass / Digitizer Assembly Replacement: passo 9, immagine 2 di 2

    • Lift the motherboard up from the back, and pull it backwards

    • Apply the same motion as with the back casing

    • You should now have separated the motherboard from the LCD/Digitizer Assembly

    Traduci

  11. Nokia Lumia 610 Touchscreen Glass / Digitizer Assembly Replacement: passo 10, immagine 1 di 2 Nokia Lumia 610 Touchscreen Glass / Digitizer Assembly Replacement: passo 10, immagine 2 di 2

    • To detach the LCD, gently lift it from the sides - be careful, and don't pull too hard on the ribbon cable !

    • It's secured in with pretty weak double-sided tape, so this step shouldn't be a problem

    Traduci

  12. Nokia Lumia 610 Touchscreen Glass / Digitizer Assembly Replacement: passo 11, immagine 1 di 2 Nokia Lumia 610 Touchscreen Glass / Digitizer Assembly Replacement: passo 11, immagine 2 di 2

    • Remove the ear-piece speaker from the Digitizer Assembly

    • It's held in by - again - pretty weak double-sided tape

    • 2nd picture gives you a look of the front of the speaker unit - it's pretty hard to damage the membrane - though, you can never be too careful !

    Traduci

  13. Nokia Lumia 610 Touchscreen Glass / Digitizer Assembly Replacement: passo 12, immagine 1 di 2 Nokia Lumia 610 Touchscreen Glass / Digitizer Assembly Replacement: passo 12, immagine 2 di 2

    • Something very easy to forget - remove the tiny rubber gasket for the microphone, and place it in the new front panel

    Traduci

  14. Nokia Lumia 610 Touchscreen Glass / Digitizer Assembly Replacement: passo 13, immagine 1 di 1

    • To put everything back together, just follow the same steps backward, and you should have yourself a good-as-new Nokia Lumia 610

    • The last step in this guide - is trying not to break it again :)

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 6 persone hanno completato questa guida.

Autore

con 2 altri collaboratori

Darie H

Membro da: 11/20/12

4.550 Reputazione

5 Guide realizzate

Distintivi: 16

+13 altri distintivi

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 3

Tutti i Tempi: 5,708