Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Introduzione

How to disassemble the phone and change broken digitizer glass, LCD display, earpiece, loudspeaker, etc.


Panoramica Video

  1. Switch off the phone and remove any SIM and memory card. There are two tips T4 screws. There are two tips T4 screws.
    • Switch off the phone and remove any SIM and memory card.

    • There are two tips T4 screws.

  2. Use a plastic tool to separate the back case. Loudspeaker / Ringer
    • Use a plastic tool to separate the back case.

    • Loudspeaker / Ringer

  3. Disconnect the Touchscreen and the LCD display flex cables. The logic board is held by tho locking clips. Use plastic tools to remove it. The logic board is held by tho locking clips. Use plastic tools to remove it.
    • Disconnect the Touchscreen and the LCD display flex cables.

    • The logic board is held by tho locking clips. Use plastic tools to remove it.

  4. The Essential Toolkit

    The most helpful tools in our most compact kit.

    Acquista ora

    The Essential Toolkit

    The most helpful tools in our most compact kit.

    Acquista ora
  5. Light proximity sensor
    • Light proximity sensor

    • Earpiece

    • Audio jack connector

  6. Again use a plastic tool to separate the middle frame and the digitizer frame. Again use a plastic tool to separate the middle frame and the digitizer frame. Again use a plastic tool to separate the middle frame and the digitizer frame.
    • Again use a plastic tool to separate the middle frame and the digitizer frame.

  7. This step is for those who wants to change the LCD display. Use a sharp object to pick up a little the display. Then with a spudger or a similar tool separate the display from the frame.
    • This step is for those who wants to change the LCD display.

    • Use a sharp object to pick up a little the display.

    • Then with a spudger or a similar tool separate the display from the frame.

  8. Put some transparent tape on the broken glass. Use hot air to warm and soften the old adhesive tape. Start the separating from the middle, where the contact area is small.
    • Put some transparent tape on the broken glass.

    • Use hot air to warm and soften the old adhesive tape.

    • Start the separating from the middle, where the contact area is small.

  9. Clean the frame Clean the frame from the adhesive tape remnants and install a new one if your replacement part has come without adhesive tape. Install the new touch screen and start with reassembling.
    • Clean the frame

    • Clean the frame from the adhesive tape remnants and install a new one if your replacement part has come without adhesive tape.

    • Install the new touch screen and start with reassembling.

  10. That's all.
    • That's all.

    • .

    • .

    • .

    • .

    • .

    • .

    • Did you do it successfully?

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 11 persone hanno completato questa guida.

ZFix

Membro da: 09/12/2013

175.595 Reputazione

315 Guide realizzate

Team

Master Techs Membro di Master Techs

Community

294 Membri

957 Guide realizzate

Toughees Telecom the most perfect place for <b>Lumia Screen Repair</b>

You don’t need to worry because we are with you at every step of <a href="http://www.tougheestelecom.in/nokia-lumi... title="Nokia Lumia Repair in Delhi">Lumia screen repair in Delhi</a>, as we understand what one feels when a customer has his <b>Screen Broken or Damaged</b>. You can call us and we will give you the best advice regarding <b>Lumia Screen Repair</b> in Delhi.

Sachin Seth - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 18

Tutti i Tempi: 6,898