Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a SIM door key to remove the SIM card and SIM card tray from the device.
-
Use a T4 screwdriver to loosen the captured torx screw to the right of the SIM card tray (the screw will not come out).
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Wedge a spudger in between the screen and the back of the device, starting from the top left corner of the phone.
-
Gently pry the screen away from the back of the device using slight upward pressure.
-
Slide the spudger down towards the bottom left corner of the device, continuing to gently pry upwards. The screen will now be slightly separated from the back of the phone.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Wedge a spudger underneath the silver rectangle in the upper right corner until it pops off the back of the phone.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Wedge a spudger underneath the silver rectangle in the lower left corner until it pops off the back of the phone.
-
Completely remove the screen from the back of the phone.
-
Annulla: non ho completato questa guida.
Altre 5 persone hanno completato questa guida.
3 Commenti
Thank you alot