Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Nokia E61i Display Replacement

Cosa ti serve

  1. Nokia E61i Display Replacement, Battery: passo 1, immagine 1 di 2 Nokia E61i Display Replacement, Battery: passo 1, immagine 2 di 2
    • Remove the back cover to access the battery. Press the tab on the bottom of the cover.

    • Slide the back cover downwards off of the phone while pressing the tab down.

  2. Nokia E61i Display Replacement: passo 2, immagine 1 di 1
    • Locate the bottom-left corner of the phone where there is a spot to remove the battery.

  3. Nokia E61i Display Replacement: passo 3, immagine 1 di 1
    • Lift the battery out using your finger.

    • The E61i uses a Nokia BP-4L standard battery.

  4. Nokia E61i Display Replacement, Front Cover: passo 4, immagine 1 di 2 Nokia E61i Display Replacement, Front Cover: passo 4, immagine 2 di 2
    • Remove the four screws that secure the front cover to the rest of the phone using a T7 screwdriver.

  5. Nokia E61i Display Replacement: passo 5, immagine 1 di 1
    • Remove the cover by pulling it up and off.

  6. Nokia E61i Display Replacement, Display: passo 6, immagine 1 di 2 Nokia E61i Display Replacement, Display: passo 6, immagine 2 di 2
    • After casing and keyboard have been taken off, remove the screws holding the screen in place using a T-6 for the screws in the middle of the red circles and a T-5 for the screw in the middle of the red square.

    • Lift ribbon off of the contact with the logic board

    • *When reassembling, make sure to firmly press contacts into place to ensure a connection is made between ribbon and logic board

  7. Nokia E61i Display Replacement: passo 7, immagine 1 di 2 Nokia E61i Display Replacement: passo 7, immagine 2 di 2
    • Once the screws are out, gently pull the screen off of the phone. *NOTICE* The sticker that attaches the display (in the middle of the blue square again) and the logic board is to be removed safely and be sure not to rip this apart.

    • Finally, pull the silver case off to completely free the cracked or damaged screen.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Team

Cal Poly, Team 9-63, Walters Spring 2011 Membro di Cal Poly, Team 9-63, Walters Spring 2011

CPSU-WALTERS-S11S9G63

5 Membri

12 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 4

Tutti i Tempi: 3,599