Introduzione

Installing a new vibration component is necessary when the vibrate mode on your phone is no longer functioning properly. Installation requires no prior knowledge of mobile phone vibrators.

Parti

Nessuna parte richiesta.

  1. Locate the small button on the top of the phone.
    • Locate the small button on the top of the phone.

    • Depress the button.

    • With your other hand, pull the front cover away from the phone.

    Aggiungi Commento

  2. Remove all six 5.3 mm long T6 screws.
    • Remove all six 5.3 mm long T6 screws.

    • Remove the circuit board/faceplate sub-assembly from the back of the phone.

    • Take care to place screws in a safe location.

    Aggiungi Commento

    • After removing the circuit board/faceplate sub-assembly, locate the vibrator mechanism.

    • Remove the vibrator mechanism with tweezers by simply pulling it up and away from the phone.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Team

Clemson, Team 15-3, Benson Fall 2012 Membro di Clemson, Team 15-3, Benson Fall 2012

CLEM-BENSON-F12S15G3

3 Membri

21 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 6

Tutti i Tempi: 366