Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Locate the small button on the top of the phone.
-
Depress the button.
-
With your other hand, pull the front cover away from the phone.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove all six 5.3 mm long T6 screws.
-
Remove the circuit board/faceplate sub-assembly from the back of the phone.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using your fingers, pull the small plastic tab away from the circuit board/faceplate sub-assembly.
-
Rotate the faceplate away from the circuit board.
-
Gently remove the faceplate from the circuit board, taking care to not break the small plastic tab on the other side of the sub-assembly.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the spudger to peel back the top-left corner of the white adhesive film. This can be done by working the spudger back and forth underneath the film.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Continue to peel the film back until you can see the microphone.
-
Use tweezers to remove the microphone.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.