Introduzione

How to take out and replace the Logic Board for the Nokia 8265 Cell Phone.

Start by removing the face plate of the phone with a plastic tool.
  • Start by removing the face plate of the phone with a plastic tool.

  • Once plastic tool is wedged into the side of the phone, twist and leverage the face plate off.

Aggiungi Commento

Once the face plate is off, you will have exposed the keypad.
  • Once the face plate is off, you will have exposed the keypad.

Aggiungi Commento

  • Simply remove the keypad from on top of the phone, and place it off to the side, leaving just the phone itself remaining

Aggiungi Commento

  • Taking a very small screwdriver, carefully unscrew the six screws attaching the top layer of the screen from the body of the phone.

  • Make sure to remember what screw goes where.

Aggiungi Commento

  • Once the six screws are removed, you may take off the screen section of the phone, exposing the inner workings of the cell phone.

Aggiungi Commento

  • Be careful when removing the Logic Board from the body, lifting it with fingers on both sides.

Aggiungi Commento

  • Now you can put in your new Logic Board, and reassemble the phone.

Aggiungi Commento

Linea Traguardo

Jack

Membro da: 20/04/2012

1 Reputazione

5 Guide realizzate

Team

SUNY Cortland, Team 1-1, Getto Spring 2012 Membro di SUNY Cortland, Team 1-1, Getto Spring 2012

SUNYCORT-GETTO-S12S1G1

2 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 7

Tutti i Tempi: 1,046