1. Start by removing the face plate of the phone with a plastic tool.
    • Start by removing the face plate of the phone with a plastic tool.

    • Once plastic tool is wedged into the side of the phone, twist and leverage the face plate off.

  2. Once the face plate is off, you will have exposed the keypad.
    • Once the face plate is off, you will have exposed the keypad.

  3. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  4. Simply remove the keypad from on top of the phone, and place it off to the side, leaving just the phone itself remaining
    • Simply remove the keypad from on top of the phone, and place it off to the side, leaving just the phone itself remaining

  5. Taking a very small screwdriver, carefully unscrew the six screws attaching the top layer of the screen from the body of the phone.
    • Taking a very small screwdriver, carefully unscrew the six screws attaching the top layer of the screen from the body of the phone.

    • Make sure to remember what screw goes where.

  6. Once the six screws are removed, you may take off the screen section of the phone, exposing the inner workings of the cell phone.
    • Once the six screws are removed, you may take off the screen section of the phone, exposing the inner workings of the cell phone.

  7. Now you have successfully removed the display screen and keyboard.
    • Now you have successfully removed the display screen and keyboard.

Linea Traguardo

Un'altra persona ha completato questa guida.

Jack

Membro da: 20/04/2012

1 Reputazione

4 Guide realizzate

Team

SUNY Cortland, Team 1-1, Getto Spring 2012 Membro di SUNY Cortland, Team 1-1, Getto Spring 2012

SUNYCORT-GETTO-S12S1G1

2 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 5

Tutti i Tempi: 834