Introduzione

This guide will show you how to remove the phone's vibrator used for the vibrate ring setting

Parti

Nessuna parte richiesta.

  1. Press the button to remove the back cover. Pull the cover downward and lift it off while still pressing the button.
    • Press the button to remove the back cover.

    • Pull the cover downward and lift it off while still pressing the button.

  2. Lift the battery out of the phone by pushing down from the top and pulling out
    • Lift the battery out of the phone by pushing down from the top and pulling out

  3. Grip the front cover from the bottom.
    • Grip the front cover from the bottom.

  4. Lift the front cover off.
    • Lift the front cover off.

  5. Locate 6 screws on front of assembly and unscrew them using a T6 torx screwdriver.
    • Locate 6 screws on front of assembly and unscrew them using a T6 torx screwdriver.

  6. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  7. Insert spudger along edge of assembly and gently lift assembly away from case
    • Insert spudger along edge of assembly and gently lift assembly away from case

  8. Remove assembly from phone
    • Remove assembly from phone

  9. The logic board now sits on top of the phone.
    • The logic board now sits on top of the phone.

  10. Lift the logic board out of the phone.
    • Lift the logic board out of the phone.

  11. Locate battery charger connector
    • Locate battery charger connector

  12. Grasp top and bottom of battery charger connector on the left side
    • Grasp top and bottom of battery charger connector on the left side

  13. Lift out the battery charger connector
    • Lift out the battery charger connector

  14. Grasp vibrator which protrudes from the battery charger connector
    • Grasp vibrator which protrudes from the battery charger connector

  15. Lift the vibrator out of the battery charger connector.
    • Lift the vibrator out of the battery charger connector.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Colby Leslie

Membro da: 05/10/2010

1 Reputazione

7 Guide realizzate

Team

Cal Poly, Team 22-3, Maness Fall 2010 Membro di Cal Poly, Team 22-3, Maness Fall 2010

CPSU-MANESS-F10S22G3

4 Membri

9 Guide realizzate

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 1,079