Introduzione

This guide requires that the front plate and keypad already be removed. You will have to remove 6 screws and separate the circuit board from the rest of the phone.

Parti

Nessuna parte richiesta.

Pull up on both of the clips near the bottom of the phone as shown. Lift off the front plate. Lift off the front plate.
  • Pull up on both of the clips near the bottom of the phone as shown.

  • Lift off the front plate.

Aggiungi Commento

The keypad and LCD screen are revealed.
  • The keypad and LCD screen are revealed.

Aggiungi Commento

Separate the keypad from the phone and place aside. Wipe off any excess dust from where the keypad was attached to the phone.
  • Separate the keypad from the phone and place aside.

  • Wipe off any excess dust from where the keypad was attached to the phone.

Aggiungi Commento

Remove the 6 - 7.9 mm screws highlighted by the markers using the T-6 head on the screwdriver. Remove the 6 - 7.9 mm screws highlighted by the markers using the T-6 head on the screwdriver.
  • Remove the 6 - 7.9 mm screws highlighted by the markers using the T-6 head on the screwdriver.

Aggiungi Commento

Separate the inside of the phone from the back of the phone. Separate the inside of the phone from the back of the phone.
  • Separate the inside of the phone from the back of the phone.

Aggiungi Commento

Gently pull apart the circuit board from the rest of the phone. There is a small connector holding these two pieces together, so use caution when pulling apart so as not to damage it.
  • Gently pull apart the circuit board from the rest of the phone.

  • There is a small connector holding these two pieces together, so use caution when pulling apart so as not to damage it.

Aggiungi Commento

Conclusione

To reattach the circuit board, line up the connector at the top of the board with the back of the LCD Screen attachment. Place the two boards together, and screw in the 6 screws.

Reid Polstra

Membro da: 22/10/2012

1 Reputazione

7 Guide realizzate

Team

Clemson, Team 15-5, Benson Fall 2012 Membro di Clemson, Team 15-5, Benson Fall 2012

CLEM-BENSON-F12S15G5

3 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 595