Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Press and hold the button at the bottom of the back side of the phone while sliding the back plate down to remove the back cover.
-
Note: Images on the right side may be hovered over to reveal larger versions.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lift up the battery from the inside of the phone.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
Attrezzo utilizzato in questo passaggio:T6 Torx Screwdriver$9.99-
Using a .208 head T-6 Screwdriver remove the two screws at the bottom of the battery cavity.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a plastic opening tool to remove the silver cover over the antenna.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two newly revealed .208 inch screws at the top using a T-6 screwdriver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
WARNING: Use extreme caution when removing and handling the logic board as it is very fragile.
-
With caution, use a plastic prier to separate the back silver casing from the front of the phone. This may require force.
-
Disconnect the logic board from the small orange chip.
-
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.