Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the plastic opening tool to pry between the seam of the black phone cover which is located at the base of the screen.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Have a container ready to keep track of small parts.
-
Use the t6 screwdriver to remove the two visible screws that are immediately below the screen.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Keep the phone closed, and slide the Ipod tool between the the silver and black phone case. Use the tool to slide all the way around the case to release the catches.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pull out the circuit board, which will remove it completely from the case
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
If the metal case is not already free, simultaneously release the metal tabs on both sides of the metal casing to remove the display screen.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lift off the display screen and disconnect it from the circuit board.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.