Salta al contenuto principale
  1. Slide the rear panel in the indicated direction to unlock it.
    • Slide the rear panel in the indicated direction to unlock it.

  2. After unlocking it, the rear panel can now be lifted up. After unlocking it, the rear panel can now be lifted up.
    • After unlocking it, the rear panel can now be lifted up.

  3. Remove the two T6 screws near the camera
    • Remove the two T6 screws near the camera

  4. Unclip the several clips holding the front bezel in place
    • Unclip the several clips holding the front bezel in place

    • Be sure not to break off or damage the clips, otherwise the front bezel might no longer stay in place!

  5. Push in the pins holding in the keypad
    • Push in the pins holding in the keypad

  6. The keypad can now be removed.
    • The keypad can now be removed.

  7. Lift up the logic board / display and remove it from the case.
    • Lift up the logic board / display and remove it from the case.

Conclusione

To reassemble your device, follow these instructions in reverse order.

iSzymon

Membro da: 13/10/2020

491 Reputazione

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 18