Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Press each release button on either side of the battery cover and simultaneously remove the battery cover from the phone.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pull the battery out of the phone with your fingers.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two screws on either side of the battery case using the microscrewdriver using the T5 bit
-
NOTE: Keep the screws in a safe place while you continue working.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove screws using the same T5 screw bit to release the computer chip from the case
-
NOTE: Keep the screws in a safe place while you continue working
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully lift the black frame off the screen with your fingers
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully remove the computer chip and screen out of the black case with your fingers
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
The screen is attached to the motherboard by an orange ribbon
-
Carefully detach the ribbon from the motherboard using your fingers
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Reattach new screen by connecting the orange ribbon to the computer chip
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Place computer chip and screen back into black case
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Snap the front case back in place with the bottom case with your fingers
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Locate the four screws that secure the back case to the rest of the phone.
-
Unscrew all four screws using a "T-5" star shaped screw driver, turning counter-clockwise.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Holding the rear case, applying pressure to the back of the phone near the location of the battery in order to separate the two components.
-