Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Place your thumb on the middle of the back cover and push it toward the bottom of the phone to slide the cover off.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a plastic opening tool (or your finger) to gently pry the battery out of the battery slot on the back of the phone.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lift the metal sim card holder (at the bottom of the battery slot) up and carefully pry the sim card out of its slot with a plastic opening tool or your finger.
-
After removal, lower the metal sim card holder into its original position.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Insert the plastic opening tool into the crack between the front and back panels.
-
Gently pry the front cover away from the back cover while sliding the plastic opening tool towards the top of the phone.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lift the bottom of the front cover away from the phone.
-
Continue lifting until the top of the front cover is fully removed from the phone.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the 4 screws surrounding the screen using the precision T6 screwdriver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lift the screen away from the phone and circuit board.
-
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.