Introduzione

If pushing the power switch up to the on direction, you may need to use this guide to replace the power switch.

Press down firmly to remove the battery cover and display battery.
  • Press down firmly to remove the battery cover and display battery.

  • Then remove the battery.

Aggiungi Commento

Remove the 7mm Phillips #1 screw.
  • Remove the 7mm Phillips #1 screw.

Aggiungi Commento

  • Place the plastic opening tool in between the two plastic panels and slowly work your way around the device.

  • Unlatch the clips on the inside and pull device apart.

  • Some clips will break when forced open.

Aggiungi Commento

  • Using a spudger carefully pry switch from housing.

Aggiungi Commento

  • Use wire cutters to cut the two black wires attached to the old switch.

  • You must use a splicer or a soldering gun to reattach the wires of the new switch.

  • If you splice the new switch wires together in the opposite order of the old switch wires, the new switch will still work.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Benjamin franklin

Membro da: 20/01/2015

101 Reputazione

1 Guida realizzata

Team

USF Tampa, Team 19-2, Blackwell Winter 2015 Membro di USF Tampa, Team 19-2, Blackwell Winter 2015

USFT-BLACKWELL-W15S19G2

4 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 60