Introduzione

If your flashlight no longer charges its battery, it might be time to change your solar panel with this guide.

Press down firmly to remove the battery cover and display battery.
  • Press down firmly to remove the battery cover and display battery.

  • Then remove the battery.

Aggiungi Commento

Remove the 7mm Phillips #1 screw.
  • Remove the 7mm Phillips #1 screw.

Aggiungi Commento

  • Place the plastic opening tool in between the two plastic panels and slowly work your way around the device.

  • Unlatch the clips on the inside and pull device apart.

  • Some clips will break when forced open.

Aggiungi Commento

  • Pull the panel away from the rest of the assembly and cut the red and black wires coming from the panel

  • Be careful not to cut the ground-wire for the motherboard, it is the same color and goes to the exact same place as the solar panel wire.

  • For reassembly you will need to either splice, or solder the wires onto the replacement.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Daniel Bumiller

Membro da: 20/01/2015

201 Reputazione

2 Guide realizzate

Team

USF Tampa, Team 19-2, Blackwell Winter 2015 Membro di USF Tampa, Team 19-2, Blackwell Winter 2015

USFT-BLACKWELL-W15S19G2

4 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 61