Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Look towards the topside of the tablet, where the power button is located.
-
Insert a plastic opening tool in the crack between the two parts of the case.
-
Move it gently back and forth to open the case.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
With the plastic opening tool in the opening between the two sides of the case, slide the tool along the tablet's border to separate the two sides completely.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the tape holding the battery in place.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Insert the flat end of the spudger tool in the crack beneath the battery.
-
Move the spudger tool carefully side to side to remove the glue that is holding the battery in place.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
After the battery is unglued, locate the cables that connect it to the motherboard.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Desolder the cables with a soldering iron and use a desoldering braid to remove the solder.
-
Annulla: non ho completato questa guida.
Altre 3 persone hanno completato questa guida.
Un commento
where do you find that battery? tried searching by the numbers on it and nothing