Salta al contenuto principale

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Nintendo Wii mini Fan Replacement

Cosa ti serve

  1. Nintendo Wii mini Fan Replacement, Unscrew the Bottom: passo 1, immagine 1 di 2 Nintendo Wii mini Fan Replacement, Unscrew the Bottom: passo 1, immagine 2 di 2
    • Remove the two rubber feet at the back of the console to reveal the hidden screws.

    • Remove the four 6mm Phillips #0 screws.

  2. Nintendo Wii mini Fan Replacement, Remove the Cover: passo 2, immagine 1 di 3 Nintendo Wii mini Fan Replacement, Remove the Cover: passo 2, immagine 2 di 3 Nintendo Wii mini Fan Replacement, Remove the Cover: passo 2, immagine 3 di 3
    • Turn the Wii mini right-side up. Then run a plastic opening tool around the middle edge of the console to loosen the top piece.

    • Gently lift the top piece of the console and set it aside.

  3. Nintendo Wii mini Fan Replacement, Fan: passo 3, immagine 1 di 2 Nintendo Wii mini Fan Replacement, Fan: passo 3, immagine 2 di 2
    • Turn the Wii mini around so that the back of the device is facing you.

    • Using a Phillips #0 Screwdriver, unscrew the two 6mm screws on either side of the fan piece.

    • You may need to use tweezers to pull out the screws once they are loosened.

  4. Nintendo Wii mini Fan Replacement: passo 4, immagine 1 di 2 Nintendo Wii mini Fan Replacement: passo 4, immagine 2 di 2
    • Using your fingers, gently pull the top of the pin connector straight up to detach the fan from the console.

  5. Nintendo Wii mini Fan Replacement: passo 5, immagine 1 di 1
    • Remove the fan piece and set it aside.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Team

UWT Liner: Group 5 Membro di UWT Liner: Group 5

Community

3 Membri

10 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 15

Tutti i Tempi: 1,230