Salta al contenuto principale

Introduzione

Use this replacement guide for step-by-step instruction on how to replace the power and accompanying buttons on the Wii U console's front face panel.

  1. You will first need to find all the screws hidden underneath the black (or white) square stickers. They are all located on the bottom side of the Wii U. Use a spudger to remove the stickers if it is difficult to peel off with your fingers.
    • You will first need to find all the screws hidden underneath the black (or white) square stickers. They are all located on the bottom side of the Wii U.

    • Use a spudger to remove the stickers if it is difficult to peel off with your fingers.

  2. Remove the five Phillips #0 screws.
    • Remove the five Phillips #0 screws.

    • Remove the four Tri-Wing Y1 screws.

  3. Remove the CMOS battery door on the left side of the console. Once the door is removed, remove the three Phillips #0 screws.
    • Remove the CMOS battery door on the left side of the console.

    • Once the door is removed, remove the three Phillips #0 screws.

  4. Gently pry off the top lid of the Wii U. Gently pry off the top lid of the Wii U. Gently pry off the top lid of the Wii U.
    • Gently pry off the top lid of the Wii U.

  5. Rotate the device so that the front plate is facing you. Remove the two Phillips #1 screws. Remove the two Phillips #1 screws.
    • Rotate the device so that the front plate is facing you.

    • Remove the two Phillips #1 screws.

  6. Remove the ribbon cable and separate the front plate from the main console. Remove the ribbon cable and separate the front plate from the main console. Remove the ribbon cable and separate the front plate from the main console.
    • Remove the ribbon cable and separate the front plate from the main console.

  7. Remove the three Phillips #1 screws.
    • Remove the three Phillips #1 screws.

  8. Once unscrewed, remove the black braces that hold the power button, eject button, and sync button in place.
    • Once unscrewed, remove the black braces that hold the power button, eject button, and sync button in place.

  9. Remove the desired button(s).
    • Remove the desired button(s).

Conclusione

To reassemble your device, follow these instructions in reverse order.

Emily Vasquez

Membro da: 24/02/2016

707 Reputazione

3 Guide realizzate

Team

USF Tampa, Team 1-2, Leahy Spring 2016 Membro di USF Tampa, Team 1-2, Leahy Spring 2016

USFT-LEAHY-S16S1G2

3 Membri

11 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 15

Ultimi 30 Giorni: 45

Tutti i Tempi: 2,307