Salta al contenuto principale

Nintendo Wii Faceplate Replacement

Cosa ti serve

  1. Nintendo Wii Faceplate Replacement, Faceplate: passo 1, immagine 1 di 2 Nintendo Wii Faceplate Replacement, Faceplate: passo 1, immagine 2 di 2
    • Use a metal spudger to remove the white plastic screw covers stuck to the lower case near the front of the Wii.

  2. Nintendo Wii Faceplate Replacement: passo 2, immagine 1 di 1
    • Remove the two 8.3 mm Tri-Wing screws hidden under the covers you just removed.

  3. Nintendo Wii Faceplate Replacement: passo 3, immagine 1 di 1
    • Remove the single 5.9 mm Phillips screw under the controller port door nearest the faceplate.

  4. Nintendo Wii Faceplate Replacement: passo 4, immagine 1 di 1
    • Use a metal spudger to remove the rubber foot stuck to the side of the Wii near the DVD drive opening.

  5. Nintendo Wii Faceplate Replacement: passo 5, immagine 1 di 1
    • Remove the single 5.9 mm Phillips screw hidden under the foot you just removed.

  6. Nintendo Wii Faceplate Replacement: passo 6, immagine 1 di 2 Nintendo Wii Faceplate Replacement: passo 6, immagine 2 di 2
    • Carefully pull the faceplate away from the front of the Wii.

    • Use a pair of tweezers to disconnect the LED cable's plastic connector from the motherboard.

    • Remove the faceplate.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 22 persone hanno completato questa guida.

3 Commenti

Any more to do if pressing the on button does nothing, its still red power light?

Kyrre - Replica

Tanks for this guide Btw

Kyrre - Replica

Thanks for the guide, I just wish it continued with replacing the components within the faceplate, as I wanted to replace the white shell. Still helpful though!

Cynthia - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 14

Ultimi 7 Giorni: 74

Ultimi 30 Giorni: 326

Tutti i Tempi: 53,386