Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Pull down on the battery cover release lever and pull back to remove the cover.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the eight 9 mm screws from the back panel using the Tri-point Y1 screwdriver.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully turn over the controller and place it on a flat surface.
-
Slowly separate the top panel from the bottom panel.
-
Once separated, set aside the top panel.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using tweezers remove the three grey button pads from the motherboard.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
With your fingers gently grip the motherboard on both sides and lift it away from the back panel.
-
Annulla: non ho completato questa guida.
Altre 6 persone hanno completato questa guida.