Aggiusta le tue cose Community Store

Nintendo Switch 2 Chip ID

Scritto Da: Shahram Mokhtari (e 2 altri collaboratori)
Pubblicato: June 10, 2025
  • Commenti: 5
  • Preferiti: 0
  • Visualizzazioni: 15,3k

Nintendo Switch 2 Chip ID

Scritto Da: Shahram Mokhtari (e 2 altri collaboratori)
Pubblicato: June 10, 2025
  • Commenti: 5
  • Preferiti: 0
  • Visualizzazioni: 15,3k

Smontaggio

Introduzione

This is the chip ID of the Nintendo Switch 2's main board.

Check out our Nintendo Switch 2 teardown for more details.

Special thanks to our community member Chunglin Chin for contributing to this!

Questo smontaggio non è una guida di riparazione. Per riparare il tuo Nintendo Switch 2, usa il nostro manuale di assistenza.

  1. Nintendo Switch 2 Chip ID, Front side: passo 1, immagine 1 di 2 Nintendo Switch 2 Chip ID, Front side: passo 1, immagine 2 di 2

    • NVIDIA GMLX30-A1 applications processor w/ GPU

    • Micron MT62F768M64D4EK-026 WT:B 6 GB LPDDR5 SDRAM memory

    • Infineon CP10359AT USB type-C controller

    • Likely Nintendo B2423 Game Card reader controller

    • Genesys Logic GL852G quad-port USB 2.0 hub

    • Analog Devices MAX17050 battery fuel gauge

    • Diodes Incorporated PI2SSD3212NCE 14-bit 2:1 SSD switch

    Modifica

  2. Nintendo Switch 2 Chip ID: passo 2, immagine 1 di 1

    • Texas Instruments TPS2121 dual-input, single-output power multiplexer

    • Likely Analog Devices MAX18000 boost converter

    • Texas Instruments TPS62825 2 A step-down converter

    • Texas Instruments TPS25200 5 V eFuse

    • Texas Instruments TPS2553 USB power switch

    • Texas Instruments TS5A23166 dual SPST analog switch

    Modifica

  3. Nintendo Switch 2 Chip ID: passo 3, immagine 1 di 1

    • STMicroelectronics accelerometer & gyroscope

    • Texas Instruments TMP451 temperature sensor

    Modifica

  4. Nintendo Switch 2 Chip ID, Back side: passo 4, immagine 1 di 2 Nintendo Switch 2 Chip ID, Back side: passo 4, immagine 2 di 2

    • SK hynix HN8T15DEHKX075 256 GB NAND flash w/ UFS 3.1 memory controller

    • Analog Devices MAX77851SAWJ power management

    • Renesas DA9092 power management

    • Analog Devices MAX77986 single cell Li+ battery charger

    • Intelligo Technology IG2200 audio/voice processor

    • Realtek ALC5658 audio codec

    • Analog Devices MAX77801 buck-boost converter

    Modifica

  6. Nintendo Switch 2 Chip ID: passo 5, immagine 1 di 1

    • Nisshinbo Micro Devices R1214Z dual-channel step-up white LED driver

    • Rohm BD8316GWL step-up & inverted DC-DC converter

    • Texas Instruments TPS2553 USB power switch

    • Likely Analog Devices MAX18000 boost converter

    Modifica

  7. Nintendo Switch 2 Chip ID, Back side - Connectivity: passo 6, immagine 1 di 1

    • MediaTek MT3681AEN WiFi & Bluetooth controller

    Modifica

  8. Nintendo Switch 2 Chip ID, Joy-Con front side: passo 7, immagine 1 di 2 Nintendo Switch 2 Chip ID, Joy-Con front side: passo 7, immagine 2 di 2

    • Texas Instruments BQ25618 1.5 A buck battery charger

    • Likely Analog Devices MAX3864xA buck converter

    Modifica

  9. Nintendo Switch 2 Chip ID, Joy-Con front side - Connectivity: passo 8, immagine 1 di 1

    • MediaTek MT3689BCA Bluetooth SoC

    Modifica

  10. Nintendo Switch 2 Chip ID, Joy-Con back side: passo 9, immagine 1 di 2 Nintendo Switch 2 Chip ID, Joy-Con back side: passo 9, immagine 2 di 2

    • Analog Devices MAX98388 class-D audio amplifier

    • Texas Instruments TPS2553 USB power switch

    Modifica

  11. Nintendo Switch 2 Chip ID, Joy-Con back side - Connectivity: passo 10, immagine 1 di 1
    Modifica

  12. Nintendo Switch 2 Chip ID, Joy-Con back side - Sensors: passo 11, immagine 1 di 1

    • TDK-InvenSense ICM-42607-PN 6-axis accelerometer & gyroscope

    • AKM Semiconductor AK09919C 3-axis electronic compass

    Modifica

4Commenti sulla guida

IG2200 from Intelligo, interesting. I suspected they might have used something like RTX Voice when people commented how the microphone sounds pretty decent even when sitting 5-6 feet away from the Switch 2 but looks like they chose a dedicated solution.

Alex L - Replica

And the screen?

Marcus von Jahn - Replica

Interesting, looks like Nintendo has "returned" to Mediatek from Broadcom (the DS WiFi adapter used a Ralink controller), though that isn't accurate, as the DS had a Qualcomm controller.

Moriel Ever - Replica

Greetings:

Does anyone have a clear picture of the component: AKM Semiconductor AK09919C 3-axis electronic compass. In the Joycon 2 board. When clicking the picture the part number looks fuzzy.

Yankito - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 54

Ultimi 7 Giorni: 288

Ultimi 30 Giorni: 1,196

Tutti i Tempi: 15,323