Salta al contenuto principale

Nintendo DSi XL Wi-Fi Board Replacement

Cosa ti serve

  1. Nintendo DSi XL Wi-Fi Board Replacement, Battery: passo 1, immagine 1 di 2 Nintendo DSi XL Wi-Fi Board Replacement, Battery: passo 1, immagine 2 di 2
    • Remove the two Phillips screws securing the battery cover to the back of the handheld console.

    • Lift the battery cover off the back of the DSi XL.

  2. Nintendo DSi XL Wi-Fi Board Replacement: passo 2, immagine 1 di 1
    • Lift the battery from the DSi XL.

  3. Nintendo DSi XL Wi-Fi Board Replacement, Lower Case: passo 3, immagine 1 di 3 Nintendo DSi XL Wi-Fi Board Replacement, Lower Case: passo 3, immagine 2 di 3 Nintendo DSi XL Wi-Fi Board Replacement, Lower Case: passo 3, immagine 3 di 3
    • Remove the four rubber screw covers on the lower case by prying them up with a push pin.

  4. Nintendo DSi XL Wi-Fi Board Replacement: passo 4, immagine 1 di 1
    • Remove the following seven Phillips screws that secure the lower case to the rest of the DSi XL:

    • Four silver 5.3 mm screws

    • Two black 5.3 mm screws

    • One black 2.5 mm screw

  5. Nintendo DSi XL Wi-Fi Board Replacement: passo 5, immagine 1 di 3 Nintendo DSi XL Wi-Fi Board Replacement: passo 5, immagine 2 di 3 Nintendo DSi XL Wi-Fi Board Replacement: passo 5, immagine 3 di 3
    • Turn the DSi XL over, and open the display.

    • Insert a spudger between the upper and lower case at the bottom left corner of the DSi.

    • Slide the spudger along the bottom edge of the upper case to release the latches securing the upper case to the lower case.

  6. Nintendo DSi XL Wi-Fi Board Replacement: passo 6, immagine 1 di 2 Nintendo DSi XL Wi-Fi Board Replacement: passo 6, immagine 2 di 2
    • Close the display and turn the DSi XL over.

    • Lift the lower case from the front edge.

    • Rotate the lower case away from the DSi.

    • The lower case cannot be completely removed yet, since it is still connected to the motherboard.

  7. Nintendo DSi XL Wi-Fi Board Replacement: passo 7, immagine 1 di 2 Nintendo DSi XL Wi-Fi Board Replacement: passo 7, immagine 2 di 2
    • Using a spudger, pry the SD card/right shoulder button connector off its socket.

    • Pry the volume button/left shoulder button connector off its socket on the motherboard with a spudger.

  8. Nintendo DSi XL Wi-Fi Board Replacement, Wi-Fi Board: passo 8, immagine 1 di 2 Nintendo DSi XL Wi-Fi Board Replacement, Wi-Fi Board: passo 8, immagine 2 di 2
    • Lift the Wi-Fi board up off its socket on the motherboard.

    • Do not attempt to completely remove the Wi-Fi board yet. It is attached to the motherboard by an antenna cable.

  9. Nintendo DSi XL Wi-Fi Board Replacement: passo 9, immagine 1 di 1
    • Use a spudger to pry the Wi-Fi cable off its socket on the underside of the Wi-Fi board.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 10 persone hanno completato questa guida.

Brett Hartt

Membro da: 04/12/10

127.749 Reputazione

143 Guide realizzate

Team

iFixit Membro di iFixit

Staff

136 Membri

16.559 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 10

Ultimi 30 Giorni: 48

Tutti i Tempi: 13,344