Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
-
Rimuovi le due viti a croce Phillips che fissano la copertura della batteria al retro della console portatile.
-
Rimuovi la copertura della batteria dal retro del DSi XL.
-
-
-
Rimuovi le quattro coperture di gomma delle viti del case inferiore facendo leva su di loro con una puntina.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using the flat end of a spudger, flip up the retaining flap on the ZIF connector for the D-pad/power button cable.
-
With the pointed end of the spudger, pull the D-pad/power button cable from its connector on the motherboard.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Using the flat end of the spudger, carefully pry the battery cable out of its socket on the motherboard.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the seven 2.5 mm silver screws securing the power board to the upper case.
-
Lift the power board off the upper case.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Lift the rubber pad off the back of the power button.
-
Open the display slightly and push the power button up through the upper case.
-
Remove the power button from the handheld console.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.