Aggiusta la tua roba Comunità Store

Nintendo 3DS Motherboard Assembly Replacement

Solo Prerequisita
Questa guida è destinata a essere usata solo come prerequisito per altre guide. Da sola è incompleta.

Introduzione

Prerequisite guide for removing the motherboard assembly.

Cosa ti serve

  1. Nintendo 3DS Motherboard Assembly Replacement, Motherboard Assembly: passo 1, immagine 1 di 2 Nintendo 3DS Motherboard Assembly Replacement, Motherboard Assembly: passo 1, immagine 2 di 2

    • Grasp the microphone ribbon cable near the microphone with a pair of tweezers.

    • Pull the microphone straight up out of the upper case.

    Traduci

  2. Nintendo 3DS Motherboard Assembly Replacement: passo 2, immagine 1 di 3 Nintendo 3DS Motherboard Assembly Replacement: passo 2, immagine 2 di 3 Nintendo 3DS Motherboard Assembly Replacement: passo 2, immagine 3 di 3

    • Use the flat end of a spudger or your fingernail to flip up the retaining flap on the speaker assembly ribbon cable ZIF socket.

    • Be sure you are prying up on the hinged retaining flap, NOT the socket itself. Damaging the socket or cable will result in a 3DS that will blink its power LED when you press the power button - and do nothing else.

    • Disconnect the speaker assembly ribbon cable with a pair of tweezers.

    Traduci

  4. Nintendo 3DS Motherboard Assembly Replacement: passo 3, immagine 1 di 2 Nintendo 3DS Motherboard Assembly Replacement: passo 3, immagine 2 di 2

    • Use the flat end of a spudger or your fingernail to flip up the retaining flap on the camera ribbon cable ZIF socket.

    • Be sure you are prying up on the hinged retaining flap, not the socket itself.

    • When reassembling, note that the gold contacts face toward the motherboard (as opposed to the camera cable's gold contacts facing away).

    Traduci

  5. Nintendo 3DS Motherboard Assembly Replacement: passo 4, immagine 1 di 3 Nintendo 3DS Motherboard Assembly Replacement: passo 4, immagine 2 di 3 Nintendo 3DS Motherboard Assembly Replacement: passo 4, immagine 3 di 3

    • Remove seven Phillips screws securing the motherboard to the upper case:

    • Four 2.5 mm gold screws

    • Two 3.5 mm black screws

    • One 2.5 mm silver screw

    • When you remove this screw the volume slider can fall out.

    • Lift the side of the motherboard that sits along the bottom edge of the 3DS.

    Traduci

  6. Nintendo 3DS Motherboard Assembly Replacement: passo 5, immagine 1 di 3 Nintendo 3DS Motherboard Assembly Replacement: passo 5, immagine 2 di 3 Nintendo 3DS Motherboard Assembly Replacement: passo 5, immagine 3 di 3

    • Continue lifting the motherboard assembly and rotate it until it is resting next to the rest of the device.

    • Use the flat end of a spudger or your fingernail to flip up the retaining flap on the LCD ribbon cable ZIF socket.

    • Be sure you are prying up on the hinged retaining flap, not the socket itself.

    Traduci

  7. Nintendo 3DS Motherboard Assembly Replacement: passo 6, immagine 1 di 1

    • Remove the motherboard assembly from the rest of the device.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 6 altri collaboratori

David Hodson

Membro da: 04/13/10

150.455 Reputazione

127 Guide realizzate

Distintivi: 53

+50 altri distintivi

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 1,577