Salta al contenuto principale

Nintendo 3DS Circle Pad Joystick Replacement

Solo Prerequisita
Questa guida è destinata a essere usata solo come prerequisito per altre guide. Da sola è incompleta.

Cosa ti serve

  1. Nintendo 3DS Circle Pad Joystick Replacement, Circle Pad Joystick: passo 1, immagine 1 di 1
    • Remove the two 7.7 mm Phillips screws securing the back of the Circle Pad to the motherboard.

  2. Nintendo 3DS Circle Pad Joystick Replacement: passo 2, immagine 1 di 3 Nintendo 3DS Circle Pad Joystick Replacement: passo 2, immagine 2 di 3 Nintendo 3DS Circle Pad Joystick Replacement: passo 2, immagine 3 di 3
    • Use the flat end of a spudger to pry the back of the Circle Pad off the motherboard.

    • Lift the Circle Pad joystick off the motherboard and lay it on its back so that the ribbon cable connector is accessible.

  3. Nintendo 3DS Circle Pad Joystick Replacement: passo 3, immagine 1 di 3 Nintendo 3DS Circle Pad Joystick Replacement: passo 3, immagine 2 di 3 Nintendo 3DS Circle Pad Joystick Replacement: passo 3, immagine 3 di 3
    • Use the flat end of a spudger or your fingernail to flip up the retaining flap on the Circle Pad ribbon cable ZIF socket.

    • Be sure you are prying up on the hinged retaining flap, not the socket itself.

    • Lift the Circle Pad joystick off the motherboard.

  4. Nintendo 3DS Circle Pad Joystick Replacement: passo 4, immagine 1 di 2 Nintendo 3DS Circle Pad Joystick Replacement: passo 4, immagine 2 di 2
    • To decrease the chance of losing it during repairs, you may want to remove the two thin pads underneath the Circle Pad joystick.

    • Use a spudger or screwdriver to lift the pads up and remove them from the device.

Conclusione

To reassemble your device, follow these instructions in reverse order.

David Hodson

Membro da: 04/13/10

150.352 Reputazione

127 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 361