Aggiusta la tua roba Comunità Store

Ninja Coffee Bar CF080 Brewer Head Replacement

Introduzione

This guide will show how to remove the brewer head from the coffee machine.

Cosa ti serve

  1. Ninja Coffee Bar CF080 Brewer Head Replacement, Brewer Head: passo 1, immagine 1 di 1

    • Face the coffee machine in front of you.

    • Make sure that the coffee machine is unplugged.

    • Remove the glass carafe as it will not be needed.

    Traduci

  2. Ninja Coffee Bar CF080 Brewer Head Replacement: passo 2, immagine 1 di 1

    • Firmly grab the tab sticking out from the head of the brewer.

    Traduci

  3. Ninja Coffee Bar CF080 Brewer Head Replacement: passo 3, immagine 1 di 3 Ninja Coffee Bar CF080 Brewer Head Replacement: passo 3, immagine 2 di 3 Ninja Coffee Bar CF080 Brewer Head Replacement: passo 3, immagine 3 di 3

    • With little force, pull the tab of the brewer head in reverse direction.

    Traduci

  4. Ninja Coffee Bar CF080 Brewer Head Replacement: passo 4, immagine 1 di 1

    • Slide off the head in the direction away from the machine.

    • If the head does not come off smoothly by sliding, give a firm tug in the same direction.

    Traduci

  6. Ninja Coffee Bar CF080 Brewer Head Replacement: passo 5, immagine 1 di 3 Ninja Coffee Bar CF080 Brewer Head Replacement: passo 5, immagine 2 di 3 Ninja Coffee Bar CF080 Brewer Head Replacement: passo 5, immagine 3 di 3

    • Hold the head in the same position and lift it forward until the Ninja is facing upward toward the ceiling.

    Traduci

  7. Ninja Coffee Bar CF080 Brewer Head Replacement: passo 6, immagine 1 di 1

    • Now the brewer head is positioned to where you can seeing the bottom.

    Traduci

  8. Ninja Coffee Bar CF080 Brewer Head Replacement: passo 7, immagine 1 di 2 Ninja Coffee Bar CF080 Brewer Head Replacement: passo 7, immagine 2 di 2

    • Remove the screw with a Phillips #1 screwdriver.

    • Use Phillips #1 screwdriver.

    • Along will come a small black screw cover and spring

    Traduci

  9. Ninja Coffee Bar CF080 Brewer Head Replacement: passo 8, immagine 1 di 1

    • Twist the black lid on top clockwise until it is completely detached.

    Traduci

  10. Ninja Coffee Bar CF080 Brewer Head Replacement: passo 9, immagine 1 di 1

    • With the black upper lid detached, a smaller black cover can be removed without effort.

    Traduci

  11. Ninja Coffee Bar CF080 Brewer Head Replacement: passo 10, immagine 1 di 2 Ninja Coffee Bar CF080 Brewer Head Replacement: passo 10, immagine 2 di 2

    • Remove the 6 screws from the seal with a Phillips #1 screwdriver.

    Traduci

  12. Ninja Coffee Bar CF080 Brewer Head Replacement: passo 11, immagine 1 di 1

    • Once all screws are detached from the brewer head, it will be separated into two pieces leaving the filter.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Autore

con 5 altri collaboratori

Elizabeth Nguyen

Membro da: 09/11/17

416 Reputazione

3 Guide realizzate

Distintivi: 7

+4 altri distintivi

Team

CSU Fullerton, Team S1-G1, Bruce Fall 2017 Membro di CSU Fullerton, Team S1-G1, Bruce Fall 2017

CSUF-BRUCE-F17S1G1

4 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 10

Tutti i Tempi: 989