Introduzione

This is very similar to replacing the tubes in the device, which is show in another repair guide created for the ninja coffee bar. Be very careful with the screws because they are very small. We would suggest the magnetic mat provided by iFixit so you don't lose the screws. Just like the tube repair guide, be careful removing the protective plate because there are a lot of wires that can not be disconnected. Also, make sure to take some pictures of the wiring just incase some of them do slip loose.

  1. Unscrew eight 6mm screws with Phillips head #1 screwdriver
    • Unscrew eight 6mm screws with Phillips head #1 screwdriver

    • Remove bottom cover

    Aggiungi Commento

  2. Spedizione gratuita per ordini superiori a $20
    Usa il codice BLUEANDBLACK al checkout
    Spedizione gratuita per ordini superiori a $20
    Usa il codice BLUEANDBLACK
  3. Unscrew three 6mm screws with Phillips head #1 screwdriver
    • Unscrew three 6mm screws with Phillips head #1 screwdriver

    • Remover tube protection plate

    Aggiungi Commento

    • Detach valve tubes from valve by squeezing pins and pull tubes away from valve

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Naser Aldousari

Membro da: 10/10/2017

301 Reputazione

3 Guide realizzate

Team

USF Tampa, Team S13-G69, Cagle Fall 2017 Membro di USF Tampa, Team S13-G69, Cagle Fall 2017

USFT-CAGLE-F17S13G69

4 Membri

3 Guide realizzate

Where can I get the replacement water valve?

Mark Peters - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 14

Tutti i Tempi: 107