Aggiusta la tua roba Comunità Store

Ninja AF161 Max XL Back Vent Cover Replacement

Introduzione

If you need to replace the back vent cover, use this guide to assist you. Additionally, this is a required step for disassembly to replace other parts on the unit.

Cosa ti serve

  1. Ninja AF161 Max XL Back Vent Cover Replacement, Back Vent Cover: passo 1, immagine 1 di 1

    • The back vent cover is directly above where the power cord protrudes.

    Modifica

  3. Ninja AF161 Max XL Back Vent Cover Replacement: passo 2, immagine 1 di 2 Ninja AF161 Max XL Back Vent Cover Replacement: passo 2, immagine 2 di 2

    • Use a Phillips #2 screwdriver to unscrew and remove four 1 cm screws from the panel.

    Modifica

  4. Ninja AF161 Max XL Back Vent Cover Replacement: passo 3, immagine 1 di 2 Ninja AF161 Max XL Back Vent Cover Replacement: passo 3, immagine 2 di 2

    • Once unscrewed, remove all four screws in order to remove the back vent cover.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 21

Tutti i Tempi: 399