Aggiusta la tua roba Comunità Store

Nikon N80 Lens Mount (aka Bayonet Mount) Replacement

Introduzione

Is the lens mount in your camera damaged or broken? It might be time to replace it with a new one! This guide will explain how to replace the lens mount (also known as bayonet mount) in a Nikon N80/F80 Camera.

Cosa ti serve

  1. Nikon N80 Lens Mount (aka Bayonet Mount) Replacement, Lens Mount (aka Bayonet Mount): passo 1, immagine 1 di 1

    • Make sure the On/Off switch is in the Off position.

    Traduci

  2. Nikon N80 Lens Mount (aka Bayonet Mount) Replacement: passo 2, immagine 1 di 1

    • Place the camera so the lens is facing up.

    • If your camera has a lens on, remove it by pushing and holding the lens release button and turning the lens clockwise until it comes off.

    Traduci

  4. Nikon N80 Lens Mount (aka Bayonet Mount) Replacement: passo 3, immagine 1 di 1

    • Use a PH00 Phillips screwdriver to remove the five 4.8mm screws on the silver lens mount.

    Traduci

  5. Nikon N80 Lens Mount (aka Bayonet Mount) Replacement: passo 4, immagine 1 di 1

    • Remove the old lens mount and place the new one on.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Autore

con 4 altri collaboratori

Maegan Viloria

Membro da: 09/14/15

717 Reputazione

5 Guide realizzate

Distintivi: 8

+5 altri distintivi

Team

CSU Fullerton, Team 1-7, Bruce Fall 2015 Membro di CSU Fullerton, Team 1-7, Bruce Fall 2015

CSUF-BRUCE-F15S1G7

3 Membri

10 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 16

Ultimi 30 Giorni: 46

Tutti i Tempi: 1,979