Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a 00 Phillips head screwdriver to remove the four screws from the lens mount.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the three loose parts (spring, small rod, and metal ring) that were under the lens mount and put them aside.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use 00 Phillips head screwdriver to remove the screw from the bottom of the front black case.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use 00 Phillips head screwdriver to remove the screws from the top case (6 in all).
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a 00 Phillips head screwdriver to remove the screws from either side of the communication board.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Desolder the wires and remove them from the communication board.
-
Annulla: non ho completato questa guida.
Altre 5 persone hanno completato questa guida.
3 Commenti
Doesn't work for the 301, although it looks similar I can't find any way to remove the top or the front case
The F301 and N2000 are identical, so the guide should work. In this guide the top case isn't removed, as the film rewind knob is preventing it from coming off completely, and instead just lifted with the bit of leeway the popped up rewind knob provides.