Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
Replacing the board holding the GPS, DC in and AV out connectors.
Remplacement de la carte electronique comportant le connecteur GPS, DC IN, et AV out.
Cosa ti serve
-
-
Remove the three screw in red
-
Remove the three long screw in orange
-
Remove the screw in yellow
-
-
-
-
Toggle up the black plate and disconnect the flex cable
-
Toggle up the white plate and disconnect the flex cable
-
Push up the right slide of the connector to free it
-
-
-
Remove the six screws to free the protection plate
-
Disconnect the white cables
-
Disconnect the microphone Cable
-
-
-
Disconnect the speaker cable
-
Remove the two screws to free the PCB
-
Toggle th PCB from Left to Right
-
-
-
Remove the two screws
-
Unsolder the 3 Wires ( Red, Black, Orange )
-
Pour réassembler votre appareil, suivez les instructions dans l'ordre inverse.
Pour réassembler votre appareil, suivez les instructions dans l'ordre inverse.