Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the two visible 6.0 mm Philips #0 screws on the left and right sides of the viewfinder. These screws are highlighted in red.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the four 6.0 mm Philips #0 screws on the left and right sides of the camera.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the four highlighted 3.0 mm Philips #0 screws on the bottom of the camera.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
While pulling the bottom down, remove the back of the camera.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the six 3.0 mm Philips #0 screws on the inside of the back panel which contains the LCD screen.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Detach the ribbon cables on the LCD casing.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the metal casing containing the LCD screen using the plastic opening tool.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
You should now be able to remove the LCD screen. Replace it with a new screen.
-
Annulla: non ho completato questa guida.
Altre 4 persone hanno completato questa guida.