Nikon Coolpix S800c Motherboard Replacement Guide

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Introduzione

In this guide, we will go over the steps to remove the motherboard from a Nikon Coolpix S800c.

Cosa ti serve

Passo 1 Back Panel/Touch Screen

Nikon Coolpix S800c Motherboard Replacement Guide, Back Panel/Touch Screen: passo 1, immagine 1 di 2

Nikon Coolpix S800c Motherboard Replacement Guide, Back Panel/Touch Screen: passo 1, immagine 2 di 2

Remove all 4 screws from the bottom face of the camera using a Phillips #00 head screwdriver (found in iFixit tool kit).

Traduci

Passo 2

Using a plastic tool, pry open the back panel of the camera. Be careful not to apply too much force and damage the camera.

Traduci

Passo 3 Motherboard

Nikon Coolpix S800c Motherboard Replacement Guide, Motherboard: passo 3, immagine 1 di 1

Unscrew all 6 visible screws that secure the motherboard into place using a Phillips head screwdriver (found in iFixit tool kit).

Traduci

Passo 4

Pull the shown panel off of the motherboard to expose the Image sensor connection

Traduci

Passo 5

Lift tab up to remove the Image sensor connection strip.

Traduci

Passo 6

Nikon Coolpix S800c Motherboard Replacement Guide: passo 6, immagine 3 di 3

Pull the gray panels back to allow the hidden micro usb and hdmi insert connectors to come free.
Use a Metal Spudger to help with the process to get these connectors free from the frame.

Traduci

Passo 7

Using a Metal Spudger, lift the motherboard up from the body of the camera.

Traduci

Passo 8

Pull the motherboard off of the main body of the camera.

Traduci

Conclusione

Soldered wires attaching the motherboard to the camera body will need to be disconnected at the motherboard-end and the new wires on the replacement motherboard will need to be soldered on. To reassemble your device, follow these instructions in reverse order.