Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Introduzione

This guide will assist you in replacing your broken, cracked or malfunctioning display screen. For this replacement you will need a Phillips #000 screwdriver and a plastic opening tool.

  1. Power off the camera before beginning. Remove the battery by sliding the latch located at the bottom of the camera.
    • Power off the camera before beginning.

    • Remove the battery by sliding the latch located at the bottom of the camera.

  2. Using a Phillips head #000 screwdriver, remove the five 0.4mm screws on the bottom of the camera. Using a Phillips head #000 screwdriver, remove the five 0.4mm screws on the bottom of the camera.
    • Using a Phillips head #000 screwdriver, remove the five 0.4mm screws on the bottom of the camera.

  3. SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits

    SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits
  4. Use a plastic opening tool to carefully separate the back panel of the camera. Once loosened, use your fingers to manually separate the two panels. Once loosened, use your fingers to manually separate the two panels.
    • Use a plastic opening tool to carefully separate the back panel of the camera.

    • Once loosened, use your fingers to manually separate the two panels.

  5. Using a plastic opening tool, lift both latches that hold the ribbon cables in place. Using a plastic opening tool, lift both latches that hold the ribbon cables in place. Using a plastic opening tool, lift both latches that hold the ribbon cables in place.
    • Using a plastic opening tool, lift both latches that hold the ribbon cables in place.

  6. Carefully disconnect the orange flat ribbon cables from the latches.
    • Carefully disconnect the orange flat ribbon cables from the latches.

  7. Remove the screen from the case of the camera by carefully pushing on the back of the screen. You may need to push with a little force to get the screen to loosen. You may need to push with a little force to get the screen to loosen.
    • Remove the screen from the case of the camera by carefully pushing on the back of the screen.

    • You may need to push with a little force to get the screen to loosen.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Danielle Morris

Membro da: 24/09/2015

165 Reputazione

1 Guida realizzata

Team

Texas Tech, Team 22-2, Rauch Fall 2015 Membro di Texas Tech, Team 22-2, Rauch Fall 2015

TTU-RAUCH-F15S22G2

3 Membri

1 Guida realizzata

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 724