Salta al contenuto principale

Introduzione

  1. You will need a #00 phillip's head screwdriver and a black spudger (or equivalent tool)

Ricambi

Nessuna parte specificata.

  1. Nikon Coolpix S51c Back Cover Replacement, Back Cover: passo 1, immagine 1 di 2 Nikon Coolpix S51c Back Cover Replacement, Back Cover: passo 1, immagine 2 di 2
    • Remove all five screws from the bottom of the camera using a Phillips #00 screwdriver.

  2. Nikon Coolpix S51c Back Cover Replacement: passo 2, immagine 1 di 1
    • Open the battery door by sliding it in the direction of the arrow to reveal a hidden screw on the opposite side of the orange lever.

    • Remove this screw using a Phillips #00 screwdriver.

  3. Nikon Coolpix S51c Back Cover Replacement: passo 3, immagine 1 di 1
    • Rotate the camera to find the side panel with the lanyard attachment.

    • Detach the side panel by the lifting bottom corner slightly with the spudger.

  4. Nikon Coolpix S51c Back Cover Replacement: passo 4, immagine 1 di 1
    • Lift the back cover, being careful not to rip the orange cables between the camera and the back cover.

  5. Nikon Coolpix S51c Back Cover Replacement: passo 5, immagine 1 di 1
    • With the back cover lifted, lift the black flap that connects the ribbon to the motherboard with the spudger and carefully remove the back cover.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Ryan

Membro da: 12/04/2011

146 Reputazione

6 Guide realizzate

Team

Cal Poly, Team 18-24, Garner Spring 2011 Membro di Cal Poly, Team 18-24, Garner Spring 2011

CPSU-GARNER-S11S18G24

4 Membri

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 1,234