Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Introduzione

Is your LCD screen not displaying anything or is displaying a corrupted image? Follow this guide to replace the LCD screen.

Parti

Nessuna parte specificata.

  1. Remove two 5 mm Phillips #000 screws on the right hand side of the camera located near the power button. Use of precision tweezers to help remove loosened screws is suggested.
    • Remove two 5 mm Phillips #000 screws on the right hand side of the camera located near the power button.

    • Use of precision tweezers to help remove loosened screws is suggested.

  2. Remove two 5 mm Phillips #000 screws near the audio/video inputs on the opposite side near the flash component. Remove two 5 mm Phillips #000 screws near the audio/video inputs on the opposite side near the flash component.
    • Remove two 5 mm Phillips #000 screws near the audio/video inputs on the opposite side near the flash component.

  3. Remove three 5 mm Phillips #000 screws on the bottom end of the camera. Remove three 5 mm Phillips #000 screws on the bottom end of the camera.
    • Remove three 5 mm Phillips #000 screws on the bottom end of the camera.

  4. Carefully detach the back side of the camera by lifting both ends, with moderate force wobble until loosened enough to remove.
    • Carefully detach the back side of the camera by lifting both ends, with moderate force wobble until loosened enough to remove.

  5. With the LCD screen facing towards you, flip the screen to the right. With the LCD screen facing towards you, flip the screen to the right.
    • With the LCD screen facing towards you, flip the screen to the right.

  6. Remove three 5 mm Phillips #000 screws located on the bracket. Hold the camera with the lens facing downward to prevent the bracket from falling off once all screws are removed. Hold the camera with the lens facing downward to prevent the bracket from falling off once all screws are removed.
    • Remove three 5 mm Phillips #000 screws located on the bracket.

    • Hold the camera with the lens facing downward to prevent the bracket from falling off once all screws are removed.

  7. Disconnect the ribbons that connect the LCD screen to the camera gently using precision tweezers or fingers. Disconnect the ribbons that connect the LCD screen to the camera gently using precision tweezers or fingers.
    • Disconnect the ribbons that connect the LCD screen to the camera gently using precision tweezers or fingers.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Emilio Mena

Membro da: 14/01/2015

725 Reputazione

4 Guide realizzate

Team

UW Tacoma, Team 3-1, Rose Winter 2015 Membro di UW Tacoma, Team 3-1, Rose Winter 2015

UWT-ROSE-W15S3G1

4 Membri

8 Guide realizzate

I love ifixit instructions so much more than youtube. These are so easy and straightfoward and I love how screw sizes are carefully specified.

Susan - Replica

Congratulations! Perfect lesson !

I need HELP presentation abowt desassembler / remove motherboard and other parts to repair the lenz move mechanism. Unfortunately NIKON left Brazil and the resident Suport tecnician besides not being good, stay in quarentine (corona virus)! Special Thanks for you help! Best regards

ramos.eng - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 13

Tutti i Tempi: 2,023